헌터 하이드라와이즈(Hunter Hydrawise)


hydrawise 통합구성요소를 통해 Hunter Hydrawise Wi-Fi 관개 컨트롤러 시스템을 Home Assistant에 연동할 수 있습니다.

현재 홈어시스턴트에는 다음과 같은 장치 유형이 지원됩니다. :

설정

이를 활성화하려면 configuration.yaml 파일에 다음을 추가하십시오.

# Example configuration.yaml entry
hydrawise:
  access_token: YOUR_API_KEY

Configuration Variables

access_token

(string)(Required)

The API KEY assigned to your Hydrawise account.

scan_interval

(integer)(Optional)

The time interval, in seconds, to poll the Hydrawise cloud.

Default value:

30

API 액세스 토큰을 Hydrawise account에 로그인하고 계정 설정의 ‘My Account Details’섹션에서 ‘Generate API Key’을 클릭하십시오. 설정 파일에 해당 키를 API_KEY로 입력하십시오.

Binary Sensor

hydrawise 컴포넌트를 활성화 한 후 configuration.yaml 파일에 다음을 추가하십시오 :

# Example configuration.yaml entry
binary_sensor:
  - platform: hydrawise

Configuration Variables

monitored_conditions

(list)(Optional)

The binary sensors that should be displayed on the frontend.

Default value:

All binary sensors are enabled.

is_watering

The binary sensor is on when the zone is actively watering.

rain_sensor

Is on when the rain_sensor (if installed on the controller) is active (wet).

status

This will indicate on when there is a connection to the Hydrawise cloud. It is not an indication of whether the irrigation controller hardware is online.

Sensor

hydrawise 컴포넌트를 활성화 한 후 configuration.yaml 파일에 다음을 추가하십시오 :

# Example configuration.yaml entry
sensor:
  - platform: hydrawise

Configuration Variables

monitored_conditions

(list)(Optional)

The sensors that should be displayed on the frontend.

Default value:

All sensors are enabled.

watering_time

The amount of time left if the zone is actively watering. Otherwise the time is 0.

next_cycle

The day and time when the next scheduled automatic watering cycle will start. If the zone is suspended then the value will be NS to indicate Not Scheduled.

Switch

hydrawise 컴포넌트를 활성화 한 후 configuration.yaml 파일에 다음을 추가하십시오 :

# Example configuration.yaml entry
switch:
  - platform: hydrawise

Configuration Variables

watering_minutes

(integer)(Optional)

When manual watering is enabled this will determine the length of time in minutes that the irrigation zone will run. The allowed values are 5, 10, 15, 30, 45, or 60.

Default value:

15

monitored_conditions

(list)(Optional)

Selects the set of switches that should be enabled on the frontend. Also sets the length of time a zone will run under manual control.

Default value:

All switches are enabled.

auto_watering

Enables the Smart Watering features for this zone.

manual_watering

Enables the manual watering control for this zone.

Switch Operation

auto_wateringon인 경우 관개 구역은 Hydrawise mobile or web app을 통해 설정된 Smart Watering 일정을 따릅니다. auto_watering 스위치가 off이면 해당 구역의 Smart Watering 일정이 1 년 동안 일시 중지됩니다.

manual_wateringon인 경우 구역(zone)은 watering_minutes에 설정된 시간 동안 실행됩니다.

# An example that enables all the switches, and sets the manual watering time to 20 minutes.
switch:
  - platform: hydrawise
    watering_minutes: 20
# An example that enables only the manual control switches.
switch:
  - platform: hydrawise
    monitored_conditions: manual_watering