melcloud integration integrates Mitsubishi Electric’s MELCloud enabled devices into Home Assistant.
- Air-to-Air heat pumps, e.g., AC units - Supported
- Air-to-Water heat pumps - Work in progress
- Energy recovery ventilators - Not supported
- Other - Not supported
The integration should be configured through the user interface (“Configurations -> Integrations”) using the MELCloud login details. While not optimal, the provided password is not stored.
An expired token needs to be updated manually by adding the MELCloud integration again with the same email address.
Configuration is also possible through
configuration.yaml. The required authentication token can be found in
X-MitsContextKey header when logged into the MELCloud. The language needs to be set to English and the “Remember me” option needs to be selected.
melcloud: username: xxxx@xxxxxxx token: xxxxxxxxxxxxxxxxxxx
An Air-to-Air heat pump provides
sensor platforms. Device capabilities can limit the available parameters and sensors.
The following parameters can be controlled for the
climate platform entities:
- Power (using HVAC mode)
- Target temperature
- Operation mode (HVAC mode)
- Fan speed
The following attributes are available for
sensor platform entities:
- Room temperature
- Energy - The total consumed energy in kWh. Not supported by all models.